Get A Quote

CIP-Q45
Immersible Pumps

The immersible motor can operate in flooded conditions, submerged up to 30 feet, for up to a two-week period. The proven concept combines safety of a submersible with the ease of maintenance of an off-the shelf motor. The basic design incorporates a premium-efficiency, inverter-duty TECB (totally enclosed, blower-cooled) motor. If the motor becomes submerged, the blower shuts down without affecting the main motor. While submerged, the media cools the motor just like a true submersible. A special conduit box is used to prevent water leakage into the motor. The motor is designed to prevent infiltration of water along the shaft and into the motor using a patented hydro-seal design.

Specifications:

  • Available on a range of pumps with discharge sizes from 4″ to 30″
  • Withstands up to 30′ subergence
  • Can be submerged up to two weeks
  • Available on N, NN and NH series pumps

Designation

FEATURES AND BENEFITS:

  • Ease of maintenance and serviceability
  • No level controls, monitors, recirculating pump or piping needed
  • Excellent efficiencies
  • No cooling jacket necessary
  • Designed to run submerged for limited time periods
  • Lower thrust due to bearing frame which means longer bearing life
  • The shaft penetrates the bottom only and is sealed using a triple redundant sealing system

EASE OF MAINTENANCE:

    With the immersible motor, you can remove the motor and send it to the service shop. Meanwhile, replace it with any brand of motor that has a P-Base flange and you’re up and running.
  • Service: Any motor shop can service the motor while submersiblesrequire a certified submersible motor shop.
  • Lower initial cost: Immersible motor installations do not require level controls and monitors, clean water, recirculating pump and/or the piping required with other types of dry pit submersibles.
  • Lower operating cost: Motor efficiencies are inherently higher in T.E.B.C. motors compared to traditional dry-pit submersible motors.
  • No cooling jackets: There are no jackets that might clog and need periodic maintenance and inspection.
  • Seal options: All standard pump sealing options are available.
  • Bearing life: The pump’s immersible bearing frame absorbs the hydraulic loading which results in longer motor bearing life due to lower thrust.


  • Immersible bearing frame: Our immersible bearing frames offer the same triple redundant protection against water infiltration and are capable of submergence of up to 30 feet for a period of up to two weeks.
  • Safety: Use of Immersibles eliminates the health and safety risk concerns (such as the possible presence of pathogens like HIV, Hepatitis B. etc… in sewage fluid) present during routine inspection and maintenance procedures. In comparison, other types require either extensive steam cleaning of the motor’s outer shell if it is a wet-pit submersible or of the inside of the jacket in dry-pit submersibles, which constitutes a high-risk health hazard due to the nature of the effluents or sewage conveyed.
  • Retrofit: Easily retrofit all your existing frame mounted installations with immersible motors without the need to buy new pumps.
  • Unique blower design: Our Immersible motors do not havethe shaft protruding through the top of the motor. The shaft penetrates the bottom only and is sealed using a triple redundant sealing system.
  • Immers
  • Immers
  • Immers

Design Features

FEATURES AND BENEFITS:

  • Ease of maintenance and serviceability
  • No level controls, monitors, recirculating pump or piping needed
  • Excellent efficiencies
  • No cooling jacket necessary
  • Designed to run submerged for limited time periods
  • Lower thrust due to bearing frame which means longer bearing life
  • The shaft penetrates the bottom only and is sealed using a triple redundant sealing system

EASE OF MAINTENANCE:

    With the immersible motor, you can remove the motor and send it to the service shop. Meanwhile, replace it with any brand of motor that has a P-Base flange and you’re up and running.
  • Service: Any motor shop can service the motor while submersiblesrequire a certified submersible motor shop.
  • Lower initial cost: Immersible motor installations do not require level controls and monitors, clean water, recirculating pump and/or the piping required with other types of dry pit submersibles.
  • Lower operating cost: Motor efficiencies are inherently higher in T.E.B.C. motors compared to traditional dry-pit submersible motors.

A New Way Of Thinking:

  • Immersible motors are designed to run submerged for a limited period of time. Therefore, even in a flood situation, the pump station will operate without damage to pump bearings and shaft.

Open Impeller

  • Unique design:
  • Immersible designs by other manufacturers have a float switch which will shut those motors down until the flood water has been removed.
  • Back Pump out vanes reduces pressure on shaft seal
  • Adjustment of clearance is easy when wear & tear takes place
  • PTFE ‘O’- Ring in controlled compression protects shaft against corrosion.
  • Metal contact between shaft and impeller transmit torque & assures perfect alignment.

Stuffing Box

  • STANDARD BORE : Designed for packaging, also able to accommodates mechanical seal.
  • BIG BORE: Enlarged Chamber for Increased seal life through improved cooling & lubrication.
  • TAPER BORE: lower seal face temperature, self venting & draining. Solid & Vapours circulated away from seal face.

Unique Design:

  • Immersible designs by other manufacturers have a float switch which will shut those motors down until the flood water has been removed.
Pump Selector
.